Sangoma Amphenol "Y" Cable for Sangoma A400 Cards (6ft)

The optional Amphenol "Y" cable is used to connect up to two Sangoma A400 Cards to a telephone patch panel. The Sangoma Amphenol "Y" Cable interfaces with all Sangoma A400 Series, and other telephony cards that require a amphenol cable between cables and analog telephony circuitry.

Sangoma Amphenol "Y" Cable for Sangoma A400 Cards Connects (2) A400 Cards to Telephone Patch Panel

Sangoma A400 Architecture

The A400 consists of an A400 REMORA daughterboard mounted on the AFT PCI /PCI Express. The A400 REMORA card has six sockets each which can accept an FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines respectively.

Up to four additional A400 REMORA daughterboards can be mounted in empty slot positions beside the A400 assembly, connected to the A400 by a backplane bus connector. Each 12 port A400 REMORA card is connected by means of a standard 12 line color coded telephone cable terminating at the card in a robust DB25 connector, and ready for hard wiring into a punch block at for the PSTN connection.