Maximize

CyberData V2 VoIP Loudspeaker Amplifier - Wireless (011096)

Get your CyberData V2 VoIP Loudspeaker Amplifier - Wireless (011096) from voip.com.vn and find out more about the rest of the Cyberdata product offering.

More details

Share on Facebook!

Send to a friend

Print

More info
Comments

CyberData V2 VoIP Loudspeaker Amplifier - Wireless (011096)

Write Review

No reviews

This item has been discontinued.

Shipping

Brand CyberData

SKU 011096

Please Note: The CyberData V2 VoIP Loudspeaker Amplifier has been discontinued. For an alternative, please see our range of CyberData Speakers / Loudspeakers Amplifiers.

Note: The loudspeaker Horn is not included. Please order the Loudspeaker Horn separately.

VoIP V2 Loudspeaker Amplifier, Wireless

Now with up to 25 watts output (802.3at)

The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations. The CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier replaces CyberData VoIP Loudspeaker Amplifier Wireless (010860)

With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

Ringer Mode

The VoIP V2 Loudspeaker Amplifier supports two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a First-to-Answer ring group with IP phones. An audio ring file is activated when the second SIP extension of the ceiling speaker is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Loudspeaker Amplifier stops ringing.

Features

SIP and Simultaneous Multicast
Dual-speed ethernet 10/100 Mbps
Web-based configuration
PoE 802.3at and 802.3af-enabled
Line-in for background music
Line-out connector
DTMF controlled relay
Direct 8 Ohm speaker drive
User-uploadable tones and messages
Digital and manual volume control
Second SIP endpoint "Night Ringer"
Autoprovisioning
Auto-call voice message from input port sense

Loudspeaker Amplifier Specifications

Ethernet I/F 10/100 Mbps
Power Input PoE 802.3at or 802.3af
Operating Temperature -30 to 55 C (-22 to 131 F)
Protocol SIP RFC 3261
Payload Types G711
Regulatory Compliance FCC Class A, CE
Warranty 2 Years Limited
Dimensions 14" x 10" x 4"
Output 802.3af - up to 8 watts
802.3at - up to 25 watts
Lineout:
- Output Signal Amplitudes 2.0 VPP maximum
- Output Level +2dBm nominal
- Total Harmonic Distortion 0.5% maximum
- Boxed Weight 6.5 lbs.
Part Number
- Loudspeaker Amplifier, AC 011095
- Loudspeaker Amplifier, Wireless 011096
- Loudspeaker Amplifier, PoE 011097