Please Note: This product has been discontinued. For an alternative, we recommend the ACTi Outdoor Bullet Cameras
ACTi TCM-1231 H.264 Megapixel Outdoor IP IR D/N PoE Bullet Camera
The ACTi TCM-1231 H.264 1.3 Megapixel Outdoor IP IR D/N PoE Bullet Camera features a 1/3", 1.3 megapixel Aptina progressive scan CMOS sensor, a 3.3-12mm (f/1.6) varifocal lens, and an infrared LED array for day and night surveillance. With the mechanical IR cut filter, the camera assures good color rendition in up to 0.5 lux illumination, whereas the IR LEDs make for clear imagery even in total darkness (0 lux).
Auto White Balance adjusts the red and blue signals in the MWB mode by taking a standard white color reference to get the most natural colors. Auto Gain Control adjusts the signal strength to maintain a constant brightness level.
ACTi TCM-1231 Features
1/3" and 1.3 MP Progressive Scan CMOS
Day/Night Functionality
Mechanical IR Cut Filter
IR LED Array for 0 lux Performance
3.3-12mm (f/1.6) Varifocal Lens
SXGA Resolution (1280 x 1024) at 18 fps
Selectable H.264/MPEG-4SP/MJPEG
Two-way Audio Support
Video Motion Detection
PoE Class 3 / 12 VDC
Technical Specification
Device
Device Type Bullet Camera
Image Sensor Progressive Scan CMOS
Sensor Size 1/3" (4.8 x 3.6 mm)
Day / Night Yes
Minimum Illumination Color: 0.5 lux at F1.0 (30 IRE, 2400°K); B/W: 0 lux (IR LED on)
Color to B/W switch CDS sensor based switch, configurable
Mechanical IR Cut Filter Yes
IR Sensitivity Range 700 - 1100 nm
IR LED IR LED x 24 (850 nm)
IR Working Distance 30 m (0 lux, 30 IRE, Max Exposure Gain)
Maximum Frame Rate vs. Resolution 18 fps at 1280 x 1024 (SXGA); 26 fps at 1280 x 720 (HD 720p); 30 fps at 640 x 480 (VGA); 30 fps at 320 x 240 (QVGA); 30 fps at 160 x 112 (QQVGA)
Multi-Streaming Simultaneous dual streams based on two configurations
Bit Rate 28 Kbps - 6 Mbps (per stream)
Bit Rate Mode Constant, Variable
S/N Ratio More than 44 dB
Image Enhancement Wide dynamic range; White balance: automatic, hold, predefined and manual; Brightness; Saturation; Contrast;
Sharpness; Automatic gain control; Auto exposure: automatic, predefined and manual; Flickerless
Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector
Security IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1X network access control
Alarm
Alarm Trigger Video motion detection (3 regions); External device through digital input
Alarm Response Notify control center; Change camera settings; Command other devices; E-mail notification with snapshots; Upload video, snapshot to FTP server; Activate external device through digital output
Interface
Digital Input 1, terminal block
Digital Output 1, terminal block
General
Power Source / Consumption
PoE Class 3 (IEEE802.3af) / 8.16 W (IR on)
DC 12V / 6.96 W (IR on) (adapter not included)
Weight 685 g (1.51 lb)
Dimensions (Ø x L) 77 mm x 220 mm (3.03"x 8.66")
Environmental Casing Weatherproof (IP66 rated)
Operating Temperature -20 °C ~ 50 °c (-4 °F ~ 122 °F)
Operating Humidity 10% ~ 85% RH
Approvals Camera: CE, FCC, IP66
Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available; ONVIF Compliant
Firmware Access Browser Microsoft Internet Explorer 6.0 or newer