PORTech MT-354 - 4 channel FXO/FXS/GSM Fixed Wireless Terminal

0 Write Review No reviews In stock for next day delivery

Shipping Brand PORTech Communications SKU MT-354

£623.00 exc. VAT £747.60 inc. VAT Select currency Quantity

PORTech MT-354 - 4 channel FXO/FXS/GSM Fixed Wireless Terminal

The PORTech MT-354 is an FWT that supports FXS, FXO and GSM interfaces. The MT-354 can connect to a PBX, the PSTN or VoIP gateway. Supporting 4 GSM channels at once, up to 4 calls can be passing through concurrently when 4 SIM cards are used.

PORTech MT-354 Features

• Auto-select most economic route - The MT-354 automatically routes calls out over GSM or PSTN, depending on the destination.
• 4 Channel - Up to 4 SIM cards allow for four GSM channels to be active at a time.
• Polarity Reversing function
• Set GSM dial-out code amount
• Limit of communicating time
• GSM simulated echo-bell function
• Follow Me - PSTN to GSM and GSM to PSTN

The PORTech MT-354 can connect to your analogue phone line and divert calls to your mobile via its SIM card. Call forwarding rates to mobiles via the PSTN are typically expensive,therefore - when out of the office - calls to the office analogue line would be missed or forwarded to your mobile at considerable cost.

The MT-354 can transfer all incoming calls using its FXO port to GSM and connect calls directly to your mobile using more cost-effective mobile-to-mobile tariffs.

Many mobile operators offer great value deals on same network calls. Thus, if a SIM of the same network as your mobile is used, these inclusive minutes or low call rates can be used when routing calls to your mobile.

The MT-354 also works in reverse - routing incoming GSM calls to a PSTN number using the analogue line.

When a phone is connected via FXS calls can also be routed by either GSM or PSTN. The MT-354 can automatically check if the dialed number is on the network, and if so, the call will connect over the lower cost GSM tariff (sounding 2 beeps to the user''s handset to confirm); if not, the call will connect over PSTN.

Specification

• Phone impendance : Below DC 1kΩ AC 600Ω (not including line)
• Phone Ring Output Voltage : 45v rms
• Phone Signal (DTMF) Standard : -3dbm -24dbm
• Phone Signal (DTMF)Time: 50 100ms
• DTMF Frequency Rate Error: ±1
• Feeder Voltage: 48v
• AC Adapter: Input 110V AC, Output 12V DC 1A

GSM Specification:

• GSM Frequency bands : Dual Band EGSM 900 and GSM 1800(GSM Phase 2+)
• GSM class : Small MS
• Transmit power :
• Class 4(2W) for EGSM 900 
• Class 1(1W) for GSM 1800
• SIM card reader : External – connected via interface connector
• Antenna : 50 Ohm antenna coaxial connector
• Temperature range : 
• Normal operation : -20℃ to +55℃
• Restricted operation : -25℃ to -20℃ and +55℃ to 70℃
• Storage : -40℃ to +85℃