Maximize

CyberData SIP-enabled IP V2 Paging Amplifier

Features:
► SIP compatible
► Night Ringer function
► Dual speed 10/100 Mbps
► Web-base firmware upgradeable
► Power-over-ethernet enabled
► IGMP
► Autoprovisioning
► Line-out connector

More details

Share on Facebook!

Send to a friend

Print

More info
Comments

The CyberData SIP-enabled IP V2 Paging Amplifier is a Powered over Ethernet (PoE 802.3af or 802.3at) and VoIP paging device that provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.

With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

The V2 Paging Amplifier can be configured as a Night Ringer with two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the Paging Amplifier is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Paging Amplifier stops ringing.

Standard night ringer function can be utilized as detailed in the Operation Guide.

The V2 Paging Amplifier is the most powerful PoE-powered paging device on the market today and perfect for any environment requiring high-powered mass notification.

Note: The Mini-Horn Loudspeaker (Part #011068) that is shown is sold separately.

VoIP V2 Paging Amplifier Specifications
Protocol	SIP RFC 3261 Compatible
Ethernet I/F	10/100 Mbps
Power Input	PoE 802.3at or 802.3af
Operating Temperature	-10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
Payload Types	G711
Output Level: 802.3af 802.3at*	Up to 8 watts Up to 25 watts
Line In: Input Signal Amplitudes Input Impedance	2.0 VPP maximum 10k ohm
Line Out: Output Signal Amplitudes Output Level Total Harmonic Distortion Output Impedance	2.0 VPP maximum +2dBm nominal 0.5% maximum 10k ohm
Regulatory Compliance	FCC Class A, UL 60950
Dimension	9.45" x 1.26" x 3.13" (H x W x D)
Warranty	2 Year Limited
Part Number	011061