Sangoma Vega 50 8 BRI

Sangoma Vega 50 8BRI Digital Gateway

The Sangoma Vega 50 8BRI Europa VoIP Gateway connects a wide range of legacy telephony equipment. It has the ability to connect up to 4 basic rate ISDN interfaces on 8 channels. This model has 4 BRI ports and pin switching to power your ISDN phone.

Sangoma Vega 50 Digital Gateway Overview

The Sangoma Vega connects a range of legacy telephony equipment including PBX's, ISDN telephones, ISDN, analogue phones and the PSTN to IP networks. It also ability to connect up to 10 analog ports and 8basic rate ISDN interfaces on 16 supporting NT and TE modes. Each BRI interface is able to be independently configured as either NT or TE, and allows for connectability with both a PBX and ISDN at the same time. Therefore, the Sangoma Vega does not disrupt the configuration of the existing equipment but it will increase flexibility when it comes to call routing. The Sangoma Vega features interoperability with an expanse of existing telephone systems and a number of VoIP systems. Even under power failure conditions, PTSN calls can still be made which displays the reliability and continuity of your business. The Sangoma Vega is a must for new and established businesses to upgrade their communications capability.

Each BRI interface can be independently configured as network side or terminal side. The Vega 50 media gateway can, therefore, be connected to both a PBX & the ISDN simultaneously. This configuration provides:

• •No disruption to the configuration of existing equipment
• •Flexibility & choice for call routing

Sangoma Vega 50 BRI Features:

Interfaces

VoIP

• SIP
• H.323 version 4
• Audio codecs:
  • G.711 (a-law/µ-law) (64 kbps)
  • G.729a (8kbps)
  • G.723.1 (5.3/6.4 kbps)
  • Clearmode
  • GSM (Optional)
• FAX Support – up to G3 FAX, using T.38
• Modem Support – up to V.90, using G.711
• Up to 8 VoIP channels

Telephony Interfaces

ETSI BRI

• 8 S/T interfaces presented on RJ45
• Point to point or point to multipoint
• Each interface can be configured NT or TE

LAN Interfaces

• 2 RJ-45s, 10 BaseT / 100 BaseTX, full / half duplex

Features

Telephony Features

Available on FXS ports:

• Call Waiting
• Call Forward   Unconditional, Busy, No-Answer
• Call Transfer   Blind, Consultative
• 3 Way Conference
• Do Not Disturb
• Message Waiting Indicator – Audible, Visual
• Music on Hold
• Executive Barge

Identification

• Caller ID presentation
• Caller ID screening allows connections to be accepted only from selected call sources
• H.323 gatekeeper registration
• SIP Registration & Digest Authentication

Operations, Maintenance & Billing

• HTTP(S) web server
• Radius Accounting & Login
• Remote firmwareupgrade:
  • Auto code upgrade
  • Auto configuration upgrade
• SNMP V1, V2 & V3
• Syslog
• TFTP / FTP support
• VT100   RS232 / Telnet/SSH
• Voice readback of IP parameters

Routing & Numbering

• Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
• Direct Dialing In (DDI)
• SIP registration to multiple proxies
• FXS ports support Call Waiting & Call transfer (blind & consultative)
• NAT traversal

Call Quality

• Adaptive jitter removal
• Comfort noise generation
• Silence suppression
• 802.1p/Q VLAN tagging
• Differentiated Services (DiffServ)
• Type of Service (ToS)
• QoS statistics reporting
• Echo cancellation (G.168 up to 128ms)

Security & Encryption

• Media – SRTP (Optional)
• SIP – TLS (Optional)
• Management – HTTPS, SSH Telnet
• Configurable user login passwords
• Enhanced Network Proxy (ENP) (Optional)

Hardware

Certification

EMC (Class A)

• EN55022
• EN55024
• FCC Part 15
• AS/NZS3548
• VCCI

Safety

• EN60950
• IEC60950
• UL60950
• AS/NZS60950

Telecoms

• TBR21 (FXO)
• FCC Part 68
• CS-03
• TBR3 (BRI)

Environmental

• 0° .. 40°C
• 0% .. 90% humidity (non-condensing)

FXS Line Length

• 1500ohm, up to 8km

Indicators

LED:

• LAN: speed / activity

Physical Dimensions

• 299.73mm (11.80") x 44.45mm (1.75") x 237.06mm (9.33") width/height/depth
• Weight: 1.02kg (unit only)
• Rackmount brackets supplied

Power

• Standard product: External 12V 24W AC/DC adapter

Program Storage

• Code & configuration data are stored in FLASH & executed from RAM