Please Note: The ACTi TCD-2500 1-channel H.264 Video Encoder with WDR is now Enf of Life.
ACTi TCD-2500 1-channel H.264 Video Encoder with WDR
The ACTi TCD-2500 single channel video encoder features both an analog input for the camera but also an analog output for other devices. It will compress in H.264, MPEG-4, and MJPEG formats and allows for dual streaming.
ACTi TCD-2500 Features:
- 25/30 fps at full D1 resolution
- Selectable H.264, MPEG-4 SP, MJPEG compressions with dual streaming
- Two-way audio
- Video motion detection
- Digital input and digital output
- 3D deinterlacing
- Serial ports for PTZ control
- Analog video output
Technical Specification
Device
Device Type Video Encoder
Number of Channels 1
PTZ
Protocol Pelco-D, Pelco-P V1 and V2, Dynacolor, Sony VISCA, American Dynamics
Video
Compression H.264, MPEG-4 SP, MJPEG
Maximum Frame Rate vs.Resolution 30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL) 30 fps at 352 x 240 (CIF, NTSC); 25 fps at 352 x 288 (CIF, PAL) 30 fps at 160 x 112 (QCIF, NTSC); 25 fps at 176 x 144 (QCIF, PAL)
Multi-Streaming Simultaneous dual streams based on two configurations
Bit Rate 28 Kbps - 6 Mbps (per stream)
Bit Rate Mode Constant, Variable
Image Enhancement Wide dynamic range; Brightness; Saturation; Contrast; Sharpness; Digital noise reduction; Black level extension;
Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector
Security IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1X network access control
Alarm
Alarm Trigger Video motion detection (3 regions); External device through digital input
Alarm Response Notify control center; Go to PTZ preset point or preset tour; Change camera settings; Command other devices; E-mail notification with snapshots; Save video or snapshot to local storage; Upload video, snapshot to FTP server; Activate external device through digital output
Interface
Analog Video Input 1, CVBS, 1.0Vp-p with 75Ω BNC connector
Analog Video Output 1, CVBS, 1.0Vp-p with 75Ω BNC connector
Digital Input 2, terminal block
Digital Output 1, terminal block
Serial Port RS-485, RS-422, RS-232, terminal block
Local Storage* 2.5" HDD slot (Hard Disk not included)
General
Power Source / Consumption DC 12V ±10% / 4.7 W
Weight 870 g (1.92 lb)
Dimensions (W x H x D) 147 mm x 51 mm x 139.5 mm (5.79" x 2.01" x 5.49")
Operating Temperature -10 °C ~ 50 °C (14 °F ~ 122 °F)
Maximize
