ClearOne Interact AT USB Premium Conferencing Solution
INTERACT AT is a complete conference room solution with flexibility in mind. It includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price. Find out more at voip.com.vn
ClearOne Interact AT USB Premium Conferencing Solution
INTERACT AT is a complete conference room solution with flexibility in mind. It includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price. Find out more at voip.com.vn
ClearOne Interact AT USB Premium Conferencing Solution
A complete conference room solution with flexibility in mind. The INTERACT AT includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price.
Customize your solution with multiple microphones and speaker options, direct connection to enterprise telephones, USB audio, a room controller, plus the ability to connect to the rich-media systems.
Advantages
Enables Unified Communication in the conference room
USB port connects to PC for Skype, WebEx and other A/V conferencing applications
Headset port connects to Cisco, Avaya, and Nortel handsets
Sound quality exceeds traditional conference phone with ClearOne HDConference technology - Simplified installation combines all microphone signals onto a single data cable minimizing conduit and raceway requirements. - Noise cancellation reduces background noises from fans or HVAC systems - Automatic level controls keep participants’ audio balanced and consistent
Scalable and flexable - Wireless or wired controller option - Multiple speaker mount options: wall, ceiling or custom - Select appropriate number of MIC EX and MIC PODS (max three) to fit the applications Integral network management system enables remote configuration, control and monitoring
Interoperates with NetStreams A/V over IP systems
Easy to install, program and use
Components
INTERACT AT MIXER Provides advanced audio processing for superior sound quality. INTERACT COM (Wired or Wireless) Provides an interface to telephone sets via the headset port or to PC audio via a USB port. The Wireless Com provides the interface to a wireless controller.
INTERACT MIC Each pod features three voice-activated mic elements for 360° audio pickup.
ClearOne Loudspeakers Ceiling or wall-mount options provide premium sound. Also available without speakers for custom speaker options. INTERACT MIC EX Each box contains three industry standard XLR microphone connectors. Boxes are daisy-chained from mixer using standard RJ-45 cables. Boxes can be rack-mounted with mixer or strategically positioned throughout a room to minimize microphone cable runs. INTERACT Dialer (Wired or Wireless) Controller provides an intuitive interface that emulates a telephone keypad. Specifications
Audio Performance
Conditions: Unless otherwise specified, all measurements are performed from 20 Hz to 15 kHz BW limit (No Weighting)
Dynamic Range:> 80 dB (Non-A Weighted) THD+N: < 0.02%
Audio Mixer
AEC Tail Time: 128 ms
Adaptive Noise Cancellation: 6-15 dB
Gating: Adaptive Ambient, 1st Mic Priority, Look-ahead Gating
Up to a total of 3 INTERACT MIC or INTERACT MIC EX devices can be connected to the INTERACT AT Mixer
48 kHz Sample Rate, 24-bit Resolution
Audio Mixer Line Input
Connection: Unbalanced RCA
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Audio Mixer Playback
Connection: Unbalanced Left and Right RCA (Summed Internally)
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +15 dBu
Audio Mixer Line Output
Connection: Unbalanced RCA
Impedance: 10 k
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Audio Mixer Record Output
Connection: Unbalanced Left and Right RCA (Mono Source Split Internally)
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Audio Mixer Amplifier Output
Connection: Left and Right Push Terminals
Power: 5 Watts
Frequency Response: 20 Hz – 15 kHz (+/-1 dB)
Dynamic Range:
> 80 dB THD+N: < 0.50%
(+5 dBu Line Input @ 1 kHz)
Telephone Interface
Telephone Audio Performance
Conditions: Unless otherwise specified, all
measurements are performed with Transmit
Limiter and Receive ALC disabled
Frequency Response:
250 Hz to 3.3 kHz ±1 dB THD+N: < 0.30%
re-max level 250 Hz to 3.3 kHz
SNR: > 62 dB re-max level
Telco Line Echo Cancellation
Tail Time: 32 ms
Null: 55 dB Nominal
Telephone Noise Cancellation
Noise Cancellation 6-15 dB Attenuation
RS-232 Control Port
DB9 Female
Baud Rates: 9,600 / 19,200 / 38,400 /
57,600 (Default) / 115,200
Protocol: 8 Bit / 1 Stop / No Parity
Hardware Flow Control ON (Default)/OFF
USB Configuration Port
USB 2.0 Compatible
Type: B Connector
VISCA Camera Port
Din, 9600 Baud, No Flow Control
LAN
10/100 Ethernet
RJ-45 with Activity LED
Supports: Telnet, HTTP
Link Bus Connection: RJ-45 with CAT5 Daisy-chained
Maximum Distance:
60 feet from Mixer to last device in chain
Maximum Number of INTERACT MIC Devices:
3 - Any Mix of INTERACT MIC or MIC EX
Maximum Number of INTERACT COM Devices:
1 per INTERACT Mixer
Configuration Software
INTERACT Supports:
Microsoft XP, Vista and Windows 7
INTERACT COM
Versions: Wired or Wireless (2.4 GHz)
USB Audio Channel:
USB 2.0 Compatible
Connector: Mini Type B
TX and RX Channel, 16-bit at 16 kHz
Headset Audio Channel:
Connector: RJ-9
Supported Telephone Sets:
Most Cisco, Avaya, and Nortel Phones
Audio Performance
Frequency Response: 40 to 3300 Hz
THD and Noise: < 0.04% re-max level with 0 dB Gain @ 1 kHz
Dynamic Range: > 84 dB (Non A-Weighted)
Audio Processing:
Receive Automatic Level Control
Line Echo Cancellation for Side-Tone Elimination
GPIO:
Pin 1: Global Mute (C)
Pin 2: Global Mute (S)
Pin 3: ON/OFF Hook (C)
Pin 4: ON/OFF Hook (S)
Pin 5: 5V DC up to 40 mA
INTERACT Dialer
Available in Wired or Wireless Versions
Functions: Dialing, Volume Control, Mute Control
Communications:
Wired Version: RS-232 Connected to Mixer
Wireless Version: 2.4 GHz DSSS to INTERACT COM-W (Wireless)
INTERACT MIC – Tabletop Microphone
Coverage: 360
Frequency Response:
60 Hz - 14 kHz THD+N: < 0.08%
(-45 dBu Input @ 1 kHz)
Sensitivity: -45 dBu
INTERACT MIC EX - Microphone Distribution Box
Connection: Female XLR Balanced
Maximum Level :+18 dBu
Frequency Response:
20 Hz – 15 kHz THD + N: < 0.01%
Phantom Power: 24 V @ 10 mA
Impedance: 5 kΩ per Leg or 10 kΩ Balanced
Power Supply
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
Power Consumption: 32 W Maximum
Dimensions (W x D x H)
INTERACT AT Mixer: 17 x 7.5 x 2 (43.2 cm x 19.1 cm x 5.1 cm)
INTERACT Dialer: 10.5" " x 4.5 x 2.75 (26.7 cm x 11.4 cm x 6.9 cm)
INTERACT MIC EX: 4.7 x 5.6 x 1.7 (11.9 cm x 14.3 cm x 4.4 cm)
INTERACT COM: 4.7 x 5.6 x 1.7 (11.9 cm x 14.3 cm x 4.4 cm)