PORTech MT-354 - 4 channel FXO/FXS/GSM Fixed Wireless Terminal
The PORTech MT-354 is a Fixed Wireless Terminal (FWT) which supports FXS, FXO and GSM interface - it can conenct to a PBX, the PSTN or a VoIP gateway.
The PORTech MT-354 is a Fixed Wireless Terminal (FWT) which supports FXS, FXO and GSM interface - it can conenct to a PBX, the PSTN or a VoIP gateway.
|
Brand PORTech Communications
SKU MT-354
|
£623.00 exc. VAT
£747.60 inc. VAT
Quantity
|
The PORTech MT-354 is an FWT that supports FXS, FXO and GSM interfaces. The MT-354 can connect to a PBX, the PSTN or VoIP gateway. Supporting 4 GSM channels at once, up to 4 calls can be passing through concurrently when 4 SIM cards are used.
PORTech MT-354 Features
The PORTech MT-354 can connect to your analogue phone line and divert calls to your mobile via its SIM card. Call forwarding rates to mobiles via the PSTN are typically expensive,therefore - when out of the office - calls to the office analogue line would be missed or forwarded to your mobile at considerable cost.
The MT-354 can transfer all incoming calls using its FXO port to GSM and connect calls directly to your mobile using more cost-effective mobile-to-mobile tariffs.
Many mobile operators offer great value deals on same network calls. Thus, if a SIM of the same network as your mobile is used, these inclusive minutes or low call rates can be used when routing calls to your mobile.
The MT-354 also works in reverse - routing incoming GSM calls to a PSTN number using the analogue line.
When a phone is connected via FXS calls can also be routed by either GSM or PSTN. The MT-354 can automatically check if the dialed number is on the network, and if so, the call will connect over the lower cost GSM tariff (sounding 2 beeps to the user''s handset to confirm); if not, the call will connect over PSTN.
Specification
GSM Specification:
|
No customer comments for the moment.