The Digium G100 single T1 gateway allows you to bridge the PSTN to an IP PBX, SIP to a legacy analog PBX, or migrate from a legacy PBX to an IP PBX without installing a Digium TDM Card into your server. Read More
The Digium G100 single T1 gateway allows you to bridge the PSTN to an IP PBX, SIP to a legacy analog PBX, or migrate from a legacy PBX to an IP PBX without installing a Digium TDM Card into your server. Read More
The Digium G100 single T1 gateway allows you to bridge the PSTN to an IP PBX, SIP to a legacy analog PBX, or migrate from a legacy PBX to an IP PBX without installing a Digium TDM Card into your server.
Digium G100 T1/E1/PRI Gateway Overview
Preserve precious server resources by taking the transcoding off the server and putting it into a standalone appliance. The Digium G100 gateway is easy to use and configure and can be much easier to deploy in your network than integrating a Digium card into your server. In addition, The Digium Gateway can be used with multiple servers simultaneously.
Digium G100 T1/E1/PRI Gateway Features:
Call Management Features:
-Automatic Call Type Detection: Voice/Modem/Fax
-Answer and Disconnect Supervision
-Trunk Group Support
-Dial Plan Support
-Call Routing Rules
-Call Routing Groups
-Pass Through Support for calls to toll free, local and emergency services numbers
-Automatic appending and stripping of digits to dialed numbers
-Caller ID name and number support
-Fax and Modem support
Technical Specifications:
-Single 10/100/1000Base-T Ethernet connection
-Internal universal power supply for 100 – 240 VAC
-1 x RJ45 connector for Ethernet
-1 x T1/E1 Ports
-Echo cancellation
-Auto codec negotiation via SIP
IP Telephony:
-SIP (Support for multiple SIP endpoints)
-Audio Codecs
--G.729
--G.726
--G.711 (Coding Support for A-law and u-law)
--GSM-FR
--G.722
-Auto Codec Negotiation
-Fax and Modem Support (T.38 and G.711)
T1 Signaling:
-PRI Signaling protocols:
--National ISDN-1
--National ISDN-2
--4ESS (AT&T)
--5ESS (Lucent)
--DMS100 (Nortel)
--Q.SIG
T1 CAS :
--E&M
--E&M Wink
--Feature-Group-D (DTMF, MF)
--FXS Loop Start with Forward Battery Disconnect
--FXS Loop Start
--FXS Ground Start
--FXO Loop Start with Battery Disconnect Supervision
--FXO Loop Start
--FXO Ground Start
E1:
-PRI (EuroISDN or Q.SIG)
DTMF Signaling via RFC 2833
Manufacturer
Digium
Model
G100
Digital Signaling Type
T1, E1
# of Digital Ports
1
# of Ethernet Ports
1
Ethernet Port Speeds
10/100/1000 Gigabit
Protocols Supported
SIP
Fax Support
T.38, G.711 pass thru
Echo Cancellation
Yes
Voice Codec Support
G.711 a/u law, G.722, G.726, G.729, GSM
Power
Power Supply Included
Mounting Option
Rackmount
Voice Signaling Methods
DMS100, ETSI/EURO ISDN, FXO/FXS Loop Start, FXS Ground Start, ISO QSIG, T1 CAS, PRI
Peripheral Ports
USB
# of VoIP Channels
30
Future Scalability
No
Media Processing Support
No
Modular
No
Why Pay $1,195.00 for the Digium G100 T1/E1/PRI Gateway?
No extra licenses needed, 30 channels available
Can be used with Switchvox and non-Digium brand PBX
Fanless, no moving parts
For advice, reviews and industry insight... be sure to follow us online.
Questions on Digium G100 T1/E1/PRI Gateway
From Phillip Ford at 2/11/2014 7:00 PM
Q: We purchased a refurbished G100 from you guys. We got to the default admin website at 192.168.69.1. We tried the user/pass of admin/admin and it would not let us in.
We tried to update the firmware in an attempt to reset the thing to default with no luck.
How can we reset the admin password on this device? There is no reset button!
Please advise.
Thanks.
Phillip Ford
A: Please visit the website URL below and go to page 34 see the notes section. It explains that how you can access the web interface via Hostname and MAC address of the Digium G100 Gateway.