Please note that this product has been discontinued. For an alternative we recommend the Epygi IP PBX selection
Epygi Quadro2xi IP PBX, 1 ISDN Port 2 FXS Ports
The Epygi Quadro2xi is a fully-featured IP PBX for home offices and teleworkers as the Quadro2x is. The important difference is that Quadro2xi offers you one ISDN line instead of FXO and connects you via two B-channels of 64 kbit/s each to the digital PSTN.
A 10BaseT Ethernet line provides access to the Internet. The Quadro2xi allows attaching two FXS phones and 8 fully-featured LAN IP phones. The 8 User Expansion increases the total number of LAN IP phones to 16. Additional virtual extension allow e.g., registering at various SIP servers. In addition, all extensions assigned to a line may be mirrored and act as remote IP extensions. Wherever you are, calls will reach you, and you will be able to make calls as if you were in your office.
Fully-Featured IP PBX
The Quadro2xi offers the same multitude of features as the Quadro2x: extensive PBX functionality, integrated voicemail, cost saving call routing functionality, IP routing, SIP call signaling and much more.
Integrated Internet Access Router
The Quadro2xi IP PBX embodies a fully-fledged Internet access router with firewall security, including NAT, policy and service based filtering. An extensive IPSec VPN functionality with DES, 3DES and AES encryption makes an additional contribution to data security.
VoIP Carriers
The Quadro2xi IP PBX is easily applicable for VoIP Carriers as well as small businesses. For VoIP carriers, a special wizard has been implemented that facilitates the configuration of Quadro2xi to work according to individual requirements.
Note: Please refer to the Epygi IP PBX Range Detailed Comparison Table for more information.
SIP on the WAN and LAN side (RFCs: 3261, 3263, 3265, 3311, 3323, 3324, 3325, 3428, 3515, 3578, 3581, 3725, 3891, 3892, 3842, 3856, 3863, 4028, 4235)
SDP (RFC 2327)
RTP (RFCs: 1889, 1890, 2833, 3389, 3550, 3551, 3555, draft-ietf-avt-rfc2833bis-05, draft-ietf-avt-rtpilbc-o5), in band and out of band signaling support
RTP Proxy
Fax over IP (ITU_T: T4, T30, T38, V17, V21, V27 ter, V29)
POTS Signaling
Loop start
FSK and DTMF Caller ID support
ISDN Signaling
ITU-T: Q.921, Q.931, Q.951; ETSI ETS300 102;
NTT INS64 for Japan
Extensions
Up to 70 extensions including FXS phones LAN IP
Phones remote and virtual extensions
All extensions can be registered on several SIP servers
LAN IP Phones
8 SIP phones by default
8 additional SIP phones may be added with a feature key
Remote IP extensions may be enabled for all SIP phones
System Capacity
10 simultaneous VoIP calls with external parties
Unlimited station to station calling for IP phones
Unlimited station to station calling for analog phones
2 simultaneous ISDN calls with external parties
Up to 4 simultaneous calls through a VPN
Premise Connections
2 short-loop FXS ports (RJ11)
1 Ethernet 10/100BASE T port (RJ45)
Uplink Connection
1 ISDN port to the Central Office (RJ45)
1 Ethernet 10BASE T (RJ45) (Other Quadro IP PBX models offer also FXO, ADSL or G.SDSL uplink connectivity. Please refer t0 the corresponding Technical Data Sheets.)
Billing
Radius Client (RFCS: 2865, 2866)
Internet
STUN/NAT traversal (RFC 3489)
IPSec VPN with DES, 3DES and AES encryption in tunnel mode (RFCs: 2402, 2406, 2409). Manual and automatic IKE key support
PPTP VPN
L2TP VPN
Firewall security via:
NAT (Network Address Translation)
IDS Policy and service-based filtering
Stateful inspection firewall
DHCP server on the LAN side
DHCP client on the WAN side
DNS server with forwarding functionality
SNTP (Simple Network Time Protocol) server/client for computer clock synchronization
PPPoE connection to the ISP with PAP/(MS)CHAP authentication
IP DIFFSERV for QoS
Mail client to send voice messages as e-mail attachments (.wav) and system notifications
DNS (DYNDNS) support with third party
Port forwarding
Port translation
Management
Multilingual WEB interface accessible from LAN and
WAN (HTTP/HTTPS), the WAN management access can be switched off
Password control
Remote diagnostics and software upgrade
Auto-provisioning
VoIP Carrier Wizard
Downoad/restore configuration
Legible and editable configuration files
Auto-configuration of IP phones via TFTP
SNMP Monitoring
Third Party Call Control XML RPC is available to order
Reset button with factory reset option
Custom Language Pack
Outlook Feature
Diagnostics/Testing
LEDs: Busy, Info, Fault, LAN, WAN, Line 1, Line 2
IP Call Quality Rating
Remote testing and VoIP diagnostics
Power-up diagnostics
Loop-back testing
Physical Dimensions
Desktop devices, wall-mountable: Measurements: 7.41" x 6.24" x 1.77" (19 x 16 x 4.5 cm)
Weight: 13 ounces (360 g) Conditions
41°F - 104°F (5°C - 40°C) operating temperature
41°F - 140°F (5°C - 60°C) storage temperature
5% - 90% non-condensing humidity
Power Supply Input 100 - 240 VAC; 50/60 Hz; 0.5 A Output 12.0 VDC; 1.5 A
Regulatory Compliance Safety: EN 60950; EMC: FCC Part 15 Class B; EN55022 Class B, EN55024; EN 60950;