Maximize

Advanced Network Devices IPSWS-SM Surface-Mount IP Speaker

The Advanced Network Devices IPSWS-SM Surface-Mount IP Speaker, a PoE loudspeaker, is ideally suited for auditoriums, community rooms, and large spaces.

More details

Share on Facebook!

Send to a friend

Print

More info
Comments

Advanced Network Devices IPSWS-SM Surface-Mount IP Speaker Overview

The IPSWS-SM is perfect for auditoriums, community rooms, and large spaces. ANETD's Surface Mount Wall IP Speaker is a PoE loudspeaker that requires only an RJ-45 connector to connect to existing data networks. Simultaneously, you can broadcast to both phones and speakers. It features full multicast and broadcast support and allows you to send messages to all devices, individual devices, or groups of devices.

The Advanced Network Devices IIPSWS-SM is an ideal addition to your IP Paging environment as they require no special hardware or servers. All speakers are PoE so no power needs to be installed at the location where you are placing the speaker. All you need is a Cat5 cable drop connected to a PoE Switch or PoE injector. An on-board web server exists for status and control and field upgrades.

Advanced Network Devices IPSWS-SM Features:

8" Speaker
12" x 4" x 12" surface mount wall hanging
Built in microphone for 2 way communication
Full multicast and broadcast support.
Send audio to individual devices, all devices or groups of devices.
On-board web server for status and control and field upgrades.
Easy to install — built-in test tones allow quick checkout of installation.
Interoperates with Cisco VoIP networks and phones.
Optional two channels of both contact closure and contact sensing.
10/100 Ethernet
Sensitivity: 95dB SPL
PoE Power = 8W
Supported Protocols: SIP, IPv4, HTTP, SLP, TFTP, NTP, DHCP, IGMP, ICMP, TCP/IP, UDP, Bonjour