VoiSmart vGSM board is the first 100% Asterisk compatible PCI bus card, for multiple channel (up to four) GSM communication management. This board allows systems integrators to transform highly priced fixed to mobile voice traffic into a much cheaper mobile to mobile call management, with considerable savings.
No external gateways needed.
100% compatible with EU and US GSM networks (900/1800/1900 MHz) and with Brazil and Japan networks. SMS are handled in native modality, thanks to a new Asterisk application for messages TX and RX, available free together with this board.
VoiSmart Quad GSM board is supplied with GPL open source drivers, it is compatible with all Linux / Asterisk systems, managing kernel versions from 2.6.x onwards.
The antenna is external, and included in the package.
You can find latest news and docs on VoiSmart Open Source website
Drivers for this card (kernel space), providing 4 TTY interfaces for the signalling section and a channel driver for the popular Asterisk OpenSource PBX, are available.
Bus Type: PCI 2.2 compliant
IRQ Request levels: Allocated by PCI BIOS
IO base addr (hex): Allocated by PCI BIOS
Dimensions in mm: 154mm x 107mm (PCB), 164mm x 129mm including SIM holder, bracket, connectors
Plug " " Play: yes
External Interface: 4 x SMA/F 50 Ohm antenna connectors
Antennas: included
Radio Interface: tri band GSM (900/1800/1900), phase 2/2+ compliant, class: Small MS, TX Power: Class 4 (2W) at EGSM 900
Where can I download the software? The software is based on Asterisk vISDN , see vISDN website.
You can download a recent snapshot from the snapshots page.
Installing the package is quite simple.
be sure to have asterisk installed (along with headers files)
be sure to have kernel headers installed, to be able to compile kernel modules (kernel must be > 2.6.11 )
in visdn src dir, just do ./configure ; make ; make install
cp samples/30-visdn.rules to /etc/udev/rules.d (if asterisk is running as non-root, change the above file to set the right devices permissions. You can check an alternative rules file HERE )
copy samples/vgsm.conf and vgsm_operators.conf to you asterisk conf dir, normally /etc/asterisk
edit the vgsm.conf according to the SIMs present on the board
load the kernel modules: modprobe visdn_vgsm; modprobe visdn_streamport; modprobe visdn_timer_system
start asterisk :)
with "show vgsm interfaces" you should see each interface status (Example)
with "show vgsm interfaces _interface_name_" you should see the detailed info of the interface selected ( Example ) *to dial out, just write into the dialplan: exten => _33.,1,Dial(VGSM/_interface_name_/${EXTEN})
1. Hàng hóa và dịch vụ 1.1 Hàng hóa chính hãng, mới 100%, đúng nguồn gốc xuất xứ. 1..2 Hàng hóa đã được kiểm tra và có thời gian thử nghiệm tại thị trường Việt Nam trong khoảng thời gian dài, do đó sản phẩm phải đảm bảo được sự tương thích, tính ưu việt và chất lượng
2. Giao hàng
2.1 Hàng hóa được giao tới địa điểm người mua chỉ định
3. Phương thức bảo hành - 12-36 tháng theo đúng theo tiêu chuẩn của từng nhà sản xuất.
ZLINK tuân thủ quy trình dịch vụ khép kín tránh thiếu sót thông tin trong khảo sát, giúp lập phương án triển khai tối ưu, mang lại giá trị cao nhất cho khách hàng:
1. Tiếp nhận thông tin
a. Lập hiện trạng hệ thống: Chuyên viên tư vấn của ZLINK lập hiện trạng hệ thống hiện tại của khách hàng
b. Nhận yêu cầu : Chuyên viên tư vấn ZLINK ghi nhận đầy đủ yêu cầu của khách hàng.
c. Đưa ra tư vấn ban đầu: Chuyên viên ZLINK đưa tư vấn về phương hướng xây dựng hệ thống để mang lại giá trị tối đa cho khách hàng. Khách hàng và chuyên viên tư vấn thống nhất định hướng trước khi đi qua bước tiếp theo.
2. Khảo sát chi tiết:
a. Cụ thể hóa các yêu cầu của khách hàng
b. Khảo sát chi tiết hiện trạng
3. Lập kế hoạch triển khai
Chuyên viên ZLINK lập kế hoạch triển khai và xác nhận với khách hàng:
4. Nghiệm thu, bàn giao thông tin
Đội triển khai hoàn thành dự án, lập hồ sơ bàn giao theo quy định của ZLINK.
5. Bảo trì định kỳ
Sau khi bàn giao hệ thống, chuyên viên thực hiện bảo trì định kỳ và ghi nhật ký theo quy đinh công ty.