Rhino R4T1-EC Quad T1/E1/PRI PCI Card
The Rhino R4T1-EC provides reliable, flexible, and leading-edge solutions for a demanding industry.Managing your Open Source telecommunication needs has never been easier than with Rhino products. Rhino PCI plug-in cards satisfy the needs of Open Source Telephony (OST) applications, no matter how stringent the requirement. Rhino Open Source Telephony PCI cards feature Asterisk and Linux tested software. Knowing that Rhino products are ready to perform right out of the box means that you can spend more time developing important customer relationships.
Rhino R4T1-EC Quad T1/E1/PRI PCI Card - Zaptel Compliant - Asterisk Open Source PBX Compatible & Built-In Echo Cancellation
Rhino's onboard echo-cancellation provides excellent voice quality and fast convergence rate. There is no divergence due to doubletalk and cancels multiple independent tails. The Tone Disabler disables echo canceller during voiceband modem and FAX connections. The echo cancellation module is a G.168 compliant line echo canceller, which meets and exceeds G.168-2002
Using Asterisk? Rhino Open Source Telephony PCI products allow you to utilize analog phones and wiring in conjunction with leading-edge Asterisk technology -- without having to buy expensive IP telephones. Why go IP when you can save on installations by using your existing wiring? With Rhino you can use lower cost analog phones with digital features and guaranteed T1 voice quality, all while enjoying Asterisk VoIP technology for off-premise connectivity.
Rhino R4T1-EC Features:
- Asterisk soft PBX tested and ready
- Zaptel compliant open source module source code included
- T1/E1 - PRI/ISDN embedded CSU
- Line buildout software selectable
- Custom Rhino PCI interface chip means no wasted CPU overhead
- Fractional voice and data capable
- Zttool compliant interface
- Field software upgradable
- T1 crossover cable included
- Alarm and Link status LEDs visible from the rear bracket
- E&M, PRI, Loop, Ground, Kewl, etc, signaling protocols
- Distinctive ring in Loop start mode
- Caller ID enabled in Loop start mode
- 5-year limited warranty
- Unlimited Support
Rhino R4T1-EC CSU Features:
- All Rhino PCI T1 cards feature a single chip integrated CSU with both LIU and Framer, that is software controlled and software programmable - no jumpers
- Complete T1/DS1/ISDN-PRI/J1 Transceiver Functionality
- Long-Haul and Short-Haul Line Interface for Clock/Data Recovery and Waveshaping
- Crystal-Less Jitter Attenuator
- Fully Independent Transmit and Receive Functionality
- Single chip line interface unit (LIU) and Framer
- Power Consumption: Maximum power consumption (under full load) will not exceed 100W.
Rhino R4T1-EC Zaptel Selections
- T1: D4 or ESF, AMI or B8ZS
- Line buildout select
- Manufacturer
- Rhino Equipment
- Model
- R4T1-EC
- # of Digital Ports
- 4
- Digital Signaling Type
- T1, E1, J1
- Bus Type
- PCI
- Echo Cancellation
- Yes
- Form Factor
- Half Length, Half Height
- Voltage Requirements
- 3.3v, 5.0v
- Data/Voice Support
- Yes
- Voice Signaling Methods
- CAS, ISDN PRI, PRI, CCS, AMI
- Fractional Support
- yes-half data and half voice
Why Pay $1,848.00 for the Rhino R4T1-EC 4T1 PCI Card with Echo Cancellation?
-
Single chip CSU with LIU and Framer
-
Fractional voice and data capable
-
5 year limited warranty, unlimited support
For advice, reviews and industry insight... be sure to follow us online.
Questions on Rhino R4T1-EC 4T1 PCI Card with Echo Cancellation
No questions asked yet