Netgear FS750T2 ProSafe 48 Port Smart Switch
NETGEAR has packed a lot of value into this high density switch. Start with high port density in a one unit box, add two gigabit uplinks to give an added edge to any growing business, then add key switch management capabilities and you have a powerful switch that costs a lot less than you'd expect. Forty-eight 10/100 Mbps ports and two copper Gigabit Ethernet ports connect to servers or a Gigabit-speed backbone for a non-stop, always available 10/100/1000-enabled network that can quickly deliver large multimedia, image, and video files. All 50 shielded RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink technology to make the right link. Two hot-swappable Small Form-factor Pluggable (SFP) GBIC slots provide optional fiber connectivity for greater distance.
ProSafe 48 Port 10/100 Smart Switch 2 Copper Gigabit Ports and 2 GBIC Slots
In addition, an intuitive, Web-browser interface offers the simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even setup port trunks, VLANs, and traffic prioritization. Alternatively, use SNMP-based software to manage your Netgear Smart Switch. Shipped ready for use straight out of the box, it delivers switching that?s easy to setup and use. NETGEAR ProSafe Smart Switches are ideal for adding basic management to your unmanaged networks and extending your managed networks. Forty-eight 10/100 ports and two Gigabit ports deliver non-blocking, full-speed packet forwarding from the edge of your network to the core. Two SFP GBIC fiber slots provide optional fiber connectivity for greater distance. Smart Switch capability enables the most key management features for the price of an unmanaged switch. Included are performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization. Ideal for growing businesses who want the benefits of management without the cost and complexity of a managed network. LEDs located on the front panel make switch status easy to observe and troubleshooting easy to accomplish. Made to last, this durable switch is housed in a 17-inch metal box and comes with a rack mounting kit.
Netgear FS750T2 Specifications
Network Protocol and Standards Compatibility
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x full-duplex flow control
Interfaces
- 48 10/100 Mbps auto-sensing Fast Ethernet switching ports
- 2 built-in RJ-45 Gigabit Ethernet ports for 10/100/1000 Mbps connectivity
- 2 Dual Personality SFP slots for fiber Gigabit Ethernet modules
Port Functions
- Auto-sensing and auto-negotiating capabilities for all ports
- Auto Uplink™ on all ports to make the right connection
Administrative Switch Management
- IEEE 802.1Q static VLAN (Up to 64)
- Port-based VLAN (Up to 50)
- IEEE 802.1p Class of Service (CoS)
- Port-based QoS
- IEEE802.3ad (manual) link aggregation
- IEEE 802.1D Spanning Tree Protocol
- RFC 1157 SNMP V1 and V2c
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1493 Bridge MIB
- RFC 2131 DHCP client
- Private Enterprise MIB
- Port mirroring support
- Web-based configuration
- Configuration backup/restore
- Password access control
- Firmware upgradeable
- Fanless – Acoustic Noise 0dB
Active Flow Control
- Half-duplex back-pressure control
- Full-duplex IEEE 802.3x pause frame flow control
Performance Specifications
- Forwarding modes: Store-and-forward
- Bandwidth: 13.6 Gbps
- Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
- Buffer memory: 128KB
- Address database size: 8,000 media access control (MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean time between failure (MTBF): 59,880 hours (~ 6.8 years)
LEDs
- Unit: Power
- Per port: Link, activity, speed
Power Supply
- Power consumption: 21W maximum
- 100-240V AC/50-60 Hz universal input
Physical Specifications
- Dimensions (H x W x D): 43 x 440 x 205 mm (1.7 x 17.8 x 8.1 in)
- Weight: 3.2 kg (7.0 lb)
Environmental Specifications
- Operating temperature: 32° to 104° F (0° to 40° C)
- Storage temperature: -4° to 158° F (-20° to 70° C)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 3,000 m (10,000 ft) maximum
- Storage altitude: 3,000 m (10,000 ft) maximum
Electromagnetic Compliance
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22), EN 55024 (CISPR 24)
- C-Tick
Safety
- CE mark, commercial
- CUL 60950 (Listed)/ EN 60950 (Low Voltage Directive)
Warranty
- NETGEAR Lifetime Warranty†
System Requirements
- Category 5 UTP network cables or above
- Network card for each PC
- Network software (e.g., Windows®)
Package Contents
- ProSafe 48-port Smart Switch with 2 Gigabit Ports (FS750T2)
- Rubber footpads
- Power cord
- Rack-mount kit
- Smart Switch resource CD
- Smart Switch installation guide
- Warranty/support information card
Modules
- ProSafe AGM731F 1000BASE-SX SFP GBIC
- ProSafe AGM732F 1000BASE-LX SFP GBIC
- ProSafe AGM733 1000BASE-ZX SFP GBIC
- Manufacturer
- Netgear
- Model
- Prosafe FS750T2
- # of Ethernet Ports
- 50
- # of SFP Fiber Uplink Ports
- 2
- Ethernet Port Speeds
- 10/100, 10/100/1000 Gigabit
- Mounting Option
- Rackmount, Desktop
- POE 802.3af Support
- No
- Power
- Power Supply Included
- VLAN / QOS Support
- Yes
Why Pay $239.99 for the Netgear FS750T2?
-
48 10/100 Mbps ports
-
2 10/100/1000 Mbps copper gigabit ports
-
2 Small Form-factor Pluggable (SFP) GBIC slots
For advice, reviews and industry insight... be sure to follow us online.
Questions on Netgear FS750T2
No questions asked yet