Maximize

beroNet BN2S0 Asterisk PCI Card (2 BRI ISDN ports)

beroNet BNXS0 BRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Find out more at voip.com.vn

More details

Share on Facebook!

Send to a friend

Print

More info
Comments

beroNet BN2S0 Asterisk PCI Card (2 BRI ISDN ports)

Write Review

No reviews

This item has been discontinued.

Shipping

Brand beroNet

SKU BN2S0

Availability: Discontinued

Please note that this product has been discontinued. We recommend the beroNet Berofix Gateways as a good alternative.

beroNet BN2S0 Asterisk PCI Card; 2 BRI ISDN ports

beroNet BNXS0 BRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Together with beroNet''s channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. beroNet''s channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The beroNet BNXS0 card series is available with 2, 4, or 8 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. As an option you can power each port (except BN8S0) with beroNet''s power supply module (BN-Power) to provide current to your Terminal Equipment.

The beroNet Power Bundle is only necessary if you want to supply power to ISDN phones.

Features

2, 4 or 8 BRI Ports
Each port can be configured individually for TE / NT mode
L1, L2, L3 tested (TE-Mode) for compliance to European standards for EuroISDN
Hardware bridging (for transparent voice, data and fax transmission)
PCM Bus (inter-connection between BN cards to enable hardware bridging for different cards via optionalPCM-Bus cable)
Hardware DTMF Detection
All ports can be powered individually by an power supply unit (except the BN8S0 only 4 ports can be powered, valid for NT mode only; optional unit available)
ISDN ports are short-circuit protected (by electronic fuse, auto-reset)
Line termination (100 ohms) is selectable for each port by DIP switch
PCI interface is suitable for 3.3V as well as for 5V PCI 2.2 slots (5V to 3.3V on board regulator)