Vegastream Vega 50 6x4 - 4 FXS + 2 FXO
Get your Vegastream Vega 50 6x4 - 4 fxs + 2 fxo from voip.com.vn and utilise FXO and FXS modules in your Asterisk system.
Get your Vegastream Vega 50 6x4 - 4 fxs + 2 fxo from voip.com.vn and utilise FXO and FXS modules in your Asterisk system.
|
Brand Vegastream
SKU
|
£948.00 inc. VAT
|
Availability: Discontinued
The Vega 50 6x4 gateway connects a range of legacy telephony equipment, including PBXs, ISDN telephones, the ISDN, analog phones and the PSTN to IP networks. The Vega 50 6x4 supports up to 24 analog ports, up to 16 basic rate ISDN channels on 8 interfaces or a mixture of port types and capacities. The Vega 50 6x4 is available factory configured in a number of different configurations, other configurations are available to special order.
The following gateway is configured as follows:
Each BRI interface can be independently configured as network side or terminal side. The Vega 50 6x4 gateway can, therefore, be connected to a PBX and the ISDN simultaneously. This configuration provides:
Open, Non-Proprietary Interfaces
The Vega 50 6x4 BRI interfaces supports ETSI BRI. The Vega 50 6x4, analog interfaces support standard loop start signalling. The Vega 50 6x4 gateways have proven interoperability with a wide range of existing telecommunications and VoIP equipment.
All VegaStream gateways can support SIP, H.323 and T.38 fax. The gateway can be configured for different country requirements, such as tones and line impedance.
Service Provider Applications:
Enterprise Applications:
Lifeline PSTN Backup
Vega 50 6x4 variants equipped with FXS ports are also fitted with two FXO ports. When powered the Vega can route calls to or from these two FXO ports. Under power failure conditions the two FXO ports provide a hard-wired bypass to two FXS ports allowing PSTN calls to be made even under this failure condition.
Interfaces
VoIP Protocols
Features
Operations, Maintenance and Billing
Routing and Numbering
Call Quality
Hardware
Environmental
Indicators
Physical Dimensions
Accessories
Power
Program Storage
Code and configuration data are stored in FLASH and executed from RAM
|
No customer comments for the moment.